Not sure if creative is the correct board to ask this in but i'll shoot my question anyway.
Is there any 3D Printable models available that poeple are aware of/ have made of X-series ships/stations or other things?
Thanks.
3D Printable models?
Moderators: TheElf, Moderators for English X Forum
-
- Moderator (English)
- Posts: 30532
- Joined: Fri, 16. Apr 04, 19:21
Re: 3D Printable models?
Type '3D printer' into the exact phrase box of this forum search tool and the thread posts shown there may be of interest.
A dog has a master; a cat has domestic staff.
-
- Posts: 5633
- Joined: Mon, 5. May 08, 00:05
Re: 3D Printable models?
At the german board, we have this thread about 3D printing X² models with awesome results: viewtopic.php?f=24&t=437495
Spoiler
Show
BurnIt: Boron and leaks don't go well together...
Königinnenreich von Boron: Sprich mit deinem Flossenführer
Nila Ti: Folgt mir, ihr Kavalkade von neugierigen Kreaturen!
Pick yourpoison seed [for custom gamestarts]
Feature request: paint jobs on custom starts
Königinnenreich von Boron: Sprich mit deinem Flossenführer
Nila Ti: Folgt mir, ihr Kavalkade von neugierigen Kreaturen!
Pick your
Feature request: paint jobs on custom starts
-
- Posts: 3
- Joined: Mon, 22. Jun 15, 23:53
Re: 3D Printable models?
I'm a little late to this thread, but I've had some success here for an X4 ship: https://www.reddit.com/r/X4Foundations/ ... destroyer/
I'm provided somewhat-detailed instructions in the comments on how to obtain, process, and hopefully print out a ship. Note that capital ships are much, much easier to prepare as they have less gizmos on them (no landing legs, no ramps, no cockpits, etc.) that would otherwise hinder the slicing and printing process. Seriously, I've spent hours wrestling with the cockpits and trying to get Ultimaker Cura to play nice with them, and my printing tests with an Argon Discoverer have yielded two failures so far. It would be nice if I could figure out how to just get a shell of the ship without any internals.
I'm provided somewhat-detailed instructions in the comments on how to obtain, process, and hopefully print out a ship. Note that capital ships are much, much easier to prepare as they have less gizmos on them (no landing legs, no ramps, no cockpits, etc.) that would otherwise hinder the slicing and printing process. Seriously, I've spent hours wrestling with the cockpits and trying to get Ultimaker Cura to play nice with them, and my printing tests with an Argon Discoverer have yielded two failures so far. It would be nice if I could figure out how to just get a shell of the ship without any internals.